- Price Not Available
- Price Not Available
-
-
0.000.00
Summary
Change configuration| {{summaryItem.Description}}: | None |
|---|---|
Start PositionDownward pressure of the press clamps the part with the rocker’s bending lobes before the bending action starts. | |
BendThe rocker’s rotation forms the material around the anvil with less pressure and material distortion/marring than wipe tooling. |  |
Overbend by 3°The bending action continues to form the material around the anvil until desired angle is completed. The anvil should have 5° relief to allow for the 3° overbend. (The 3° overbend applies to cold rolled steel only.) |  |
Material SpringbackThe rocker bends past 90° to compensate for material springback, leaving a 90° bent part (± 1/2°). An internal spring returns the rocker position without scraping the material like wipe tooling. |  |
Bendable Materials
- Hot Rolled Steel
- Cold Rolled Steel
- Dual Phase Steel (DP590, DP780, DP980)
- High Strength Low Alloy Steel
- Advanced High Strength Steel
- Ultra High Strength Steel
- Stainless Steel
- Galvanized Steel
- Aluminum
- Pre-painted Aluminum
- Brass
- Copper
- And Much More!
Custom Orders
- Requests for custom orders can be made by completing a Special Request Quote Form (included in this catalog), contacting Customer Service, or online.
- Shorter lengths or segmenting are possible.
- Pressure pads can be ordered with Posi-Bend™ units.
Bendable Materials
- Hot Rolled Steel
- Cold Rolled Steel
- Dual Phase Steel (DP590, DP780, DP980)
- High Strength Low Alloy Steel
- Advanced High Strength Steel
- Ultra High Strength Steel
- Stainless Steel
- Galvanized Steel
- Aluminum
- Pre-painted Aluminum
- Brass
- Copper
- And Much More!
Custom Orders
- Requests for custom orders can be made by completing a Special Request Quote Form (included in this catalog), contacting Customer Service, or online.
- Shorter lengths or segmenting are possible.
- Pressure pads can be ordered with Posi-Bend™ units.
| Brand | Lamina |
|---|---|
| Bender Type | Posi-Bend Standard |
| Rocker Diameter | 2.500 in (63.5 mm) |
| Bender Length | 36 in (914.4 mm) |
| Saddle Width (E) | 5.875 in (149.23 mm) |
| Minimum Part Height | 0.97 in (24.6 mm) |
| Saddle Height (A) | 2.875 in (73.03 mm) |
| Front Saddle (B) | 2.250 in (57.15 mm) |
| Maximum Part Thickness | 0.209 in (5.3 mm) |
| Rocker Dimension (G) | 0.983 in (24.968 mm) |
| Saddle to Key (C) | 3.625 in (92.08 mm) |
| Weight (lbs) | 119.0000 |
Start PositionDownward pressure of the press clamps the part with the rocker’s bending lobes before the bending action starts. | |
BendThe rocker’s rotation forms the material around the anvil with less pressure and material distortion/marring than wipe tooling. | |
Overbend by 3°The bending action continues to form the material around the anvil until desired angle is completed. The anvil should have 5° relief to allow for the 3° overbend. (The 3° overbend applies to cold rolled steel only.) | |
Material SpringbackThe rocker bends past 90° to compensate for material springback, leaving a 90° bent part (± 1/2°). An internal spring returns the rocker position without scraping the material like wipe tooling. | |
Bendable Materials
- Hot Rolled Steel
- Cold Rolled Steel
- Dual Phase Steel (DP590, DP780, DP980)
- High Strength Low Alloy Steel
- Advanced High Strength Steel
- Ultra High Strength Steel
- Stainless Steel
- Galvanized Steel
- Aluminum
- Pre-painted Aluminum
- Brass
- Copper
- And Much More!
Custom Orders
- Requests for custom orders can be made by completing a Special Request Quote Form (included in this catalog), contacting Customer Service, or online.
- Shorter lengths or segmenting are possible.
- Pressure pads can be ordered with Posi-Bend™ units.
Bendable Materials
- Hot Rolled Steel
- Cold Rolled Steel
- Dual Phase Steel (DP590, DP780, DP980)
- High Strength Low Alloy Steel
- Advanced High Strength Steel
- Ultra High Strength Steel
- Stainless Steel
- Galvanized Steel
- Aluminum
- Pre-painted Aluminum
- Brass
- Copper
- And Much More!
Custom Orders
- Requests for custom orders can be made by completing a Special Request Quote Form (included in this catalog), contacting Customer Service, or online.
- Shorter lengths or segmenting are possible.
- Pressure pads can be ordered with Posi-Bend™ units.
- Brand:
- Lamina
- Bender Type:
- Posi-Bend Standard
- Rocker Diameter:
- 2.500 in (63.5 mm)
- Bender Length:
- 36 in (914.4 mm)
- Saddle Width (E):
- 5.875 in (149.23 mm)
- Minimum Part Height:
- 0.97 in (24.6 mm)
- Saddle Height (A):
- 2.875 in (73.03 mm)
- Front Saddle (B):
- 2.250 in (57.15 mm)
- Maximum Part Thickness:
- 0.209 in (5.3 mm)
- Rocker Dimension (G):
- 0.983 in (24.968 mm)
- Saddle to Key (C):
- 3.625 in (92.08 mm)
- Weight (lbs):
- 119.0000
You might also be interested in the following products
Configure Product
- {{segmentOption.Description}}
-
{{segmentOption.Description}}
- {{segmentOption.Description}}
| {{summaryItem.Description}}: | None |
|---|---|
We’re the industry-leader in the production of manufacturing tools such as special punches, die components, die details, punch blanks and metal-stamping tools.
Get In Touch